background image

7

EN

1.5 Cleaning, maintenance and repairs

•  Observe the normal user cleaning and maintenance of the appliance 

in the recommended way. Do not use solvents or harsh cleaners for 

cleaning. Pollution and visible stains from fi ngers  can be cleaned using 

detergent  specially designed to clean household appliances.

•  If you do not use the appliance, you are cleaning it, or the device is 

faulty disconnect the appliance from the power supply. 

•   Electrical appliances that are cleaned after use and are not intended 

to be completely or partly immersed in water or other liquid, protect 

against the effects of dripping and / or splashing water and before 

immersion.

•   Electric household appliances, like all other technical devices, are 

subject to the surrounding environment and natural wear. Since the 

legal framework of regular maintenance is not laid down for lay-in 

electrical household appliances, the manufacturer recommends that the 

user have the appliance checked and cleaned at least once a year by a 

specialist workshop.

•   By doing so, it is possible to achieve safety, operational reliability and 

increased service life.

•   Do not disassemble the electric appliance! The appliance works with 

a dangerous voltage. For this reason, always switch off the appliance 

and disconnect it from the mains supply during user maintenance. In 

the event of a fault, please have the repair serviced by an authorized 

service center.

•   Before calling a service:

1. Turn the appliance off and on to make sure the fault reappears.

2. If the malfunction of the appliance still persists after these operations, 

call the nearest specialist service center.

•   Never repair the electric appliance yourself!

•   Unauthorized, unqualifi ed and improper use of an electric appliance 

may result in electric shock or other serious injury.

•   Only carry out the warranty or post-warranty repair of an electrical 

appliance to an authorized qualifi ed person

(*)

.

 

(*)

Competent qualifi ed expert: the sales department of the manufacturer or importer or 

the person qualifi ed and authorized to carry out this type of activity with the ability to 
avoid all risks.

Summary of Contents for ZE-302




















Reviews: