Orava ZE-302, Instruction Manual

Page: 13 / 19

13
EN
1 Ceramic soleplate
2 Nozzle
3 Water fi lling hole/cover
Open the cover and fi ll the tank with water. The volume of water must
not exceed the MAX level (300 ml).
4 Steam regulator
For steam ironing turn the regulator to the right or left for the ECO.
For steamless ironing, turn the regulator to the center. For maximum
steam, turn the regulator all the way to the right or left to BOOST and
hold.
5 Button for spraying
Pressing the button allows you to iron hard fabrics by spraying drops
of water (moistening).
6 Button for turbo steam ironing - steam blast
The button allows you to iron stubborn creases and folds of the fabric
through steam blasts.
7 Power cord swivel
During ironing, it protects the power cord from damage and allows the
iron to move freely.
8 Power cord
9 Power/temperature light
During ironing, it lights up and goes out as the set temperature is
maintained.
10 Temperature setting control
Use the knob to set the desired temperature from the minimum position
(Nylon) to the maximum position (Linen).
11 Self-Clean Button
Press to perform self-cleaning
12 MAX mark
13 Water fi lling tank
Open the cover and fi ll the tank with water. The volume of water must
not exceed the MAX level.
14 Water measuring cup
Operation
Before using this device for the fi rst time
• Remove all protective foils and stickers from the ironing board.
• Heat the appliance and iron an unnecessary piece of cloth for a few
minutes to remove any dirt from the ironing surface.