Orava ZE-302, Instruction Manual

Page: 10 / 19

10
EN
• Do not pull the iron out of the mains socket by pulling on the power
cord. Damage to the power cord or mains socket could occur. Unplug
the cable from the socket by pulling it behind the plug of the power cord.
• If the power cord is damaged, have it replaced by a specialist service
center. The iron with a damaged power cord or plug of a power cord is
forbidden to use.
• To avoid the risk of electric shock, do not repair the iron yourself or
modify it yourself. Have all repairs carried out by an authorized service
center. Interference with the product is subject to the risk of losing the
statutory right from a defective performance, quality assurance.
There is a risk of damage to equipment or other property damage!
There is a risk of electric shock! There is a risk of electrical short circuit!
Location/Installation
• The iron must be used and stored on a stable surface.
• When placing the iron on the stand, make sure that the surface on
which the stand is located is stable.
• Always make sure that the place where you want to place the device
has enough space, stability, mechanical strength.
• Do not place the iron on an electric or gas cooker and other heat
sources or near them.
Warning!
• Do not place the appliance:
- to unstable racks,
- to an uneven and unstable surface,
- on a stand that is on an unstable surface.
• Do not cover the appliance in part. Do not place any objects on the
device.
There is a danger of fi re!
Warning!
• Place the device in a place where children can not reach freely.
Prevent children from manipulating the device (played). The device may
overturn and cause very serious injury. Mechanical damage (breakage
of parts and covers) of the device can cause serious injury.
There is a risk of very serious injury!
There is a risk of damage to equipment or other property damage!
• The iron must not be left unattended when connected to an electrical
outlet.
• Do not place or use the appliance near water containers. If the
appliance falls into the water, do not remove it. First, pull the power
cord plug out of the mains socket and then select the appliance from
the water. In such cases, take the device for inspection to a specialist
service to check that it is safe and working properly.