background image

2

EN

Intended use of the device

•  The device is designed exclusively for lighting and wireless charging of 

equipment to the extent defined by technical and operating parameters 

and functions, safety and user instructions and external influences of the 

operating environment.

Warning!

• ORAVA electrical appliances are manufactured in accordance with the 

state of the art and recognized safety-technical rules. Nevertheless, 

the use or use contrary to designation may result in the risk of injury or 

endanger the life of the user or third person, damage to the device and 

other material values.

Safety instructions for using the device

• Electrical equipment is designed and manufactured in such a way as 

to allow for safe operation and use by persons without a professional 

qualification. Despite all measures taken by the manufacturer for safe 

use, handling and use, they carry with them some residual risks and 

associated potential hazards.

• The following symbols and their meanings have been used on the device 

and in the accompanying documentation to warn of possible hazards:

 

  This symbol alerts users that the device is operating a 

dangerous electrical voltage. Do not remove protective covers 

on the device.

  Failure to observe the safety instructions during use and 

operation of the device may entail:

  Danger of electric shock! 

  Danger of serious injury or life threatening!

   This symbol alerts users that the following precautions can 

be avoided if the following precautions are observed when 

operating and operating the device:

  Danger of serious injury or life threatening! 

  Danger of damage to equipment or other damage to property!

 

  This symbol means that the product is made with a double 

insulation between hazardous live parts (parts with dangerous 

voltage from the mains) and parts that are accessible in normal 

use.

Summary of Contents for WCH-003















Reviews: