11
EN
Operation
1
Plug the AC adapter cable into the connector on the lamp and plug the
AC adapter into an electrical socket.
2
Switch on the device by briefly touching button
1
. The device switches
on (the lamp lights up).
To switch off (switch off) the device, touch button
1
again. The device
switches off (the lamp goes out).
3
With the device switched on and the lamp on, briefly touch the
M
button
cyclically switch light mode:
- natural light - cold white light - warm yellow light. The default light is
natural light.
4
When the device is on and the lamp is on, touch and hold
1
changes
the intensity of the light.
5
Timed lamp off function:
In any state, long touch and hold the button to activate the timed
shutdown of the device. The light flashes twice to indicate that the sleep
timer function has been activated and the sleep time is 40 minutes. If
you press the button again, the time will be reset to 40 minutes. After
40 minutes, the lamp turns off automatically.
6
Wireless charging:
For wireless charging, turn on the lamp, place the device you want
to charge on the wireless charging zone (
3
) on the base of the lamp
(wireless charging icon). For optimal charger operation, the charger must
be located directly on the wireless charging icon. For some devices, you
need to enable wireless charging in the settings.
If your battery is completely discharged, it may take a few minutes before
charging. This is completely normal. When the battery starts charging,
the battery charging symbol will appear on your phone.
The wireless charging zone on the mobile phone must be in contact with
the wireless charging icon on the lamp base.
The wireless charging function of mobile devices and the lamp light
function work simultaneously.
