Orava RR-41 Instruction Manual Download Page 6

6

EN

1.5 Cleaning, maintenance and repairs

•  Observe  the  normal  user  cleaning  and  maintenance  of  the  device  in  the 

recommended  way.  Do  not  use  solvents  or  harsh  cleaners  for  cleaning. 

Pollution and visible stains from finger contact, respectively. The hands can 

be cleaned using detergent detergents specially designed to clean household 

devices.

•  If you do not use the device, clean it or disconnect the device from the power 

supply when the device is faulty.

•  Electrical  devices  that  are  cleaned  after  use  and  are  not  intended  to  be 

completely or partly immersed in water or other liquid, protect against the 

effects of dripping and / or splashing water and before immersion.

•  Electric  household  devices,  like  all  other  technical  devices,  are  subject  to 

the surrounding environment and natural wear. Since the legal framework of 

regular maintenance is not laid down for lay-in electrical household devices, 

the manufacturer recommends that the user have the device checked and 

cleaned at least once a year by a specialist workshop.

•  By doing so, it is possible to achieve safety, operational reliability and increased 

service life.

•  Do not disassemble the electric device! The device works with a dangerous 

voltage. For this reason, always switch off the device and disconnect it from 

the mains supply during user maintenance. In the event of a fault, please have 

the repair serviced by an authorized service center.

•  Before calling a service:

1.  Verify that you are unable to remedy the malfunction yourself according 

to the procedure described in the chapter „Remedy of operating faults“.

2.  Turn the device off and on to make sure the fault reappears.

3.  If the malfunction of the device still persists after these operations, call the 

nearest specialist service center.

•  Never repair the electric device yourself!

•  Unauthorized, unqualified and improper use of an electric device may result 

in electric shock or other serious injury.

•  Only carry out the warranty or post-warranty repair of an electrical device to 

an authorized qualified person 

(*)

.

(*)

 Competent qualified expert: the sales department of the manufacturer or importer or the person 

qualified and authorized to carry out this type of activity with the ability to avoid all risks.

Summary of Contents for RR-41























Reviews: