14
EN
Connections
Connecting the AC adapter
Connect the supplied 12 V AC adapter to an easily accessible electrical socket with the
specified voltage of 230 V/50 Hz.
Then connect the cable connector from the AC adapter to the DC 12 V connector on
this unit.
If you notice a problem, unplug the AC adapter from the electrical socket immediately.
Connect the line output to another audio device
Connect the RCA OUT (L/R) connectors on the rear panel with a suitable RCA cable to
the audio input connectors on another audio device. Then you will be able
reproduce the sound from this unit with another connected device (eg HiFi amplifier
speakers, etc.).
Observe the color resolution of the connectors on the devices and cable.
Connect the red connector to the red connector (right channel) and the white or black
connector to the white or black connector (left channel).
Connect line output from another audio device
Use a suitable cable to connect the audio output connectors on another device (e.g.
PC) to the 3.5 mm AUX IN mini-connector on the rear panel.
You will then be able to reproduce the sound from another device through the speakers
of that device.
Preparation for use
1
Carefully remove the device from its packaging and remove any packing material.
2
Unwind the AC adapter cable and stretch it to its full length.
3
Place the device on a flat, stable surface with access to an electrical socket, out
of direct sunlight and sources of excessive heat, dust, moisture, shock, and strong
magnetic fields.
4
Remove the protective element from the turntable case by pulling it out.
5
Gently push the locking clip that was used to secure the carrying arm during
transport to the right to release and unlock the carrying arm. If you are carrying the
device, lock the carrying arm again with the clip.
6
Connect the AC adapter cable to the DC jack on the turntable and the AC adapter to
an electrical socket.
