18
EN
Bluetooth
1
Turn on the Bluetooth interface on your Bluetooth device (phone, tablet, etc.). For
details, refer to the operating instructions of the device.
2
Set the auto stop control to ON.
3
Place the carrying arm in the parked position.
The device switches to Bluetooth mode, beeps, and is ready to pair.
4
On a Bluetooth device (phone, etc.), search for available Bluetooth devices. For
details, refer to the operating instructions of the device.
When RR-41 appears on the display of your Bluetooth device, select it and wait until
the pairing confirmation is shown on the display of your Bluetooth device.
with RR-41 device. A confirmation beep sounds on this unit. The devices are paired.
5
After pairing, you can start playback on your Bluetooth device. Set the appropriate
volume on it.
For details on playback controls, refer to the operating instructions of the device. The
sound from the paired device will be reproduced by this device.
6
Set the appropriate volume level on the connected device, then turn the
ON/OF/
VOLUME
control to adjust the volume level on this device.
7
When playback is finished, turn off this unit, stop playback on your Bluetooth device,
and turn off the Bluetooth interface on it.
Note
After pairing the devices, it is not necessary to perform the pairing again. The devices
will reconnect automatically the next time you turn on the Bluetooth audio source on
this device and turn on the Bluetooth interface on your Bluetooth device.
Canceling the current Bluetooth pairing and pairing with a new device When this
device is paired with a Bluetooth device and you want to cancel the pairing so that you
can connect another device, turn off Bluetooth on the first
furnished. Search for this device on another device and pair the new device as
described above.
Pairing with the old device is canceled and pairing with another Bluetooth device is
performed.
Warning!
There may be a sound when playing via Bluetooth.
These outages are caused by interference, greater distance, obstacles, etc. This is not
a malfunction of the unit.
