Orava RR-41 Instruction Manual Download Page 5

5

EN

•  Do  not  bend,  crush  or  otherwise  expose  the  power  cord  of  the  device  to 

mechanical stress or external heat sources. Damage to the power cord may 

result in electric shock.

•  When the power cord is damaged, disconnect the device from the mains and 

do not use it again.

•  If the power cord is damaged, it must be replaced by the manufacturer, its 

service department or a similarly qualified person to avoid the risk of electric 

shock.

•  Regularly  check  and  maintain  the  electrical  device  as  well  as  the  power 

cord and power socket. Disconnect the power plug regularly and clean it if 

necessary. Pollution by dust or other substances may cause disruption of the 

insulating state and consequently fire.

•  Do not expose the device to water or moisture. The ingress of water into the 

device increases the risk of electric shock.

  If the power cord is wet or the water has penetrated the water, disconnect it 

immediately from the mains. If the device is plugged into a mains socket and 

if possible, turn off the power circuit before attempting

  unplug the power. If you are pulling wet wires from a live power source, be 

very careful.

•  If the electrical equipment is installed (connecting) the protective covers are 

dismantled, the electrical parts must not be accessible to the user when the 

installation is finished.

1.4 Safety of persons

•  This  device  is  intended  for  use  and  operation  by  persons  without 

electrotechnical  qualification  -  lay  people,  according  to  the  instructions 

specified by the manufacturer.

•  Device  operation  includes  activities  such  as  switching  on  and  off,  user 

manipulation and setting of operating parameters, visual or auditory inspection 

of the equipment, and user cleaning and maintenance.

•  This device can be used by children under the age of 8 and persons with 

reduced  physical,  sensory  or  mental  capabilities  or  lack  of  experience  or 

knowledge  when  supervised  or  instructed  to  use  the  device  safely  and 

understand the dangers involved.

•  Children may not play with the device.

•  Cleaning  and  maintenance  for  users  may  not  be  performed  by  children 

unattended.

•  Always keep the device out of reach of children during use and operation. Be 

sure to download the device even for a freely accessible power cord.

•  Always be careful when operating the electric device! Do not use an electric 

device if you are overly tired, under the influence of medication or narcotic 

drugs that reduce attention and focus.

•  Inattention during operation may result in serious injury.

Summary of Contents for RR-41























Reviews: