background image

15

EN

•  Never leave the device unattended and freely accessible 

with a free power cord. Children, incompetent persons or 

animals could pull or tilt the device behind the power cord.

•  When not in use, unplug the power cord from the wall 

socket. Store the device with the power cord attached to the 

fixed parts of its covers. There is a risk of serious injury!

•  Never overload the device beyond the limits specified in the 

technical data!

•  Follow the operating and manual instructions for operating 

the device.

•  If you notice any non-standard symptoms (sounds, smells, 

smoke,...), immediately turn off the power and unplug the 

power cord. Have the device checked by a specialist garage.

•  Never attempt to repair, disassemble or modify the device 

yourself, as this may result in electric shock or fire.

•  Always switch off the main power switch and unplug the 

power cord from the electrical socket before performing user 

maintenance and cleaning.

•  Always make sure that the device is turned off and 

unplugged from the mains.

•  If any safety part/component (mechanical, electrical) is part 

of the equipment, never remove this part/ component from 

operation! If the safety part/component is damaged or not 

working, do not use the device!

•  Children under 3 years of age must be prevented from 

accessing the appliance unless they are under constant 

supervision.

•  Children under 3 years of age and under the age of 8 must 

not plug, regulate or clean the appliance or perform user 

maintenance.

CAUTION!

•  Some parts of this product may become very hot and may 

cause burns. Pay special attention when vulnerable people 

or children are present.

•  Never underestimate possible hazards and be careful!

Summary of Contents for EK-2009























Reviews: