9
EN
Unpacking/Packaging
• Unpack and dispose of all parts and accessories of packaging
materials, etiquettes and labels before operating the device. Store
all packaging materials in a safe place or keep them out of reach of
children and vulnerable persons.
There is a risk of serious injury!
There is a danger of suffocation!
Inspection/Commissioning
Caution!
• Use only an electrothermal device designed for heating that is in good
technical condition and under conditions determined by the applicable
legislative requirements, safety fire regulations and this manual.
• We recommend that you perform both initial and follow-up periodic
inspections of the device. Before installation and commissioning, check
that the device is complete and shows no visible signs of damage.
• Do not use the device if it is incomplete, damaged, or any part of it
has been damaged during transport or use. In this case, have the unit
serviced by a workshop.
• Do not attempt to interfere in any way with the structure or setup of the
device components.
• Before commissioning, clean the device according to the instructions in
the “Commissioning” section. “Before Use”.
• Never clean the device (body with electrical parts and control panel)
and power cord with plug in a manner that could cause liquid to flow
into the device. Only clean these parts with a damp cloth and wipe dry
or allow to dry.
• Clean the device only when it is turned off and unplugged from the wall
socket.
There is a risk of serious injury!
There is a risk of electric shock!
There is a risk of fire!
Location/Installation
• The device is designed for use as portable or wall mountable
(depending on model). Device fasten to the building parts of the living
area - only in accordance with the technical characteristics of the
building components, safety fire protection measures and installation
instructions.
• Use the device only in its working position (upright and with the rack or
legs correctly installed) and on a flat surface where there is no risk of
tipping over.
