background image

2

EN

Intended use of the device

  The device is designed exclusively for temperature adjustment and hot 

air distribution in enclosed living spaces, to the extent determined by 

technical and operational parameters and functions, safety and user 

instructions, and external influences of the operating environment.

  Warning!

  The installation and use of an electro heat device or an electric infra-red 

heater intended for heating is only possible if:

  that all technical conditions and requirements for fire safety set by the 

applicable legislation, technical safety standards and these operating 

and operating instructions are complied with. Do not use the device for 

heating rooms with the location of precision instruments, food, plants, 

works of art or animals, as this may affect the performance, quality and 

durability of the items concerned and animal health.

  ORAVA electrical appliances are manufactured according to state-of-

the-art knowledge and recognized safety rules. Nevertheless, improper 

and improper use or improper use may result in injury or endangerment 

to the life of the user or a third party or to a third party. damage to 

equipment and other property.

1. GENERAL SAFETY INSTRUCTIONS AND WARNINGS

•  This document contains important safety instructions and warnings for 

safe, correct and economical operation of the electrical equipment. Its 

compliance helps the user avoid risks, increase reliability and product 

life.

•  In this document, the general term product is used in text parts such as:

  electrical equipment - any device used for the production, conversion, 

transmission, distribution or use of electricity.

•  From the point of view of the purpose of using electricity, the concept 

of electrical equipment in the strict sense of the word will include the 

following categories:

- household electric appliances,

- information and communication equipment,

- consumer electronics,

- lighting equipment,

- electrical and electronic tools,

- toys and equipment for sporting and recreational purposes,

- medical devices (aids),

- monitoring and control devices,

- vending machines.

Summary of Contents for EK-2009























Reviews: