orangemarine F2.6 BMS, Owner'S Manual, Page: 169 / 244

41
4 Transporting and storing
4.1 Transporting
The outboard motor should be trailed and stored in the normal running position. If there is insufficient road clearance in this position, then trailer
the outboard motor in the tilt position using a motor support device.
CAUTION:
Do not use the tilt support lever or knob when trailering the boat. The outboard motor c ould shake loose from the tilt support and fall.
WARNING:
• Never get under the lower unit while it is tilted, even if a motor support bar is used.
•
When transporting or storing the outboard motor while removed from a boat, keep the outboard motor in the attitude shown.
figure 1 figure 2 figure 3
Note:
• Plac e a towel or something similar under the outboard motor to protec t it from damage when as shown in the figure 2 or figure
3 above.
• Please make sure the tiller handle faces down to make the throttle handle point to the direction of propeller.
41