Oracle X4 series Administration Manual Download Page 131

Page: 131 / 240

Backing Up and Restoring Firmware

Configurations and BIOS Settings

Use the procedures in this section to back up, restore, and replicate system firmware, Oracle

ILOM configurations, and BIOS configurations, and to replicate those settings on multiple

systems. The procedures include:

■

“Backing Up, Restoring, or Replicating the BIOS Firmware Configuration (Oracle

ILOM)” on page 131

■

“Backing Up, Restoring, or Replicating the Oracle ILOM Firmware

Configuration” on page 135

■

“Backup, Restore, and Revert BIOS Settings (Oracle System Assistant 1.1)” on page 141

Backing Up, Restoring, or Replicating the BIOS Firmware

Configuration (Oracle ILOM)

When the configuration for the BIOS firmware changes on an Oracle server, use Oracle

Integrated Lights Out Manager (ILOM) to do the following:

■

Back up the BIOS configuration to prevent the loss of the current working configuration.

For more details, see

“Back Up the Current BIOS Firmware Configuration (Oracle

ILOM)” on page 132

■

Recover from unwarranted configuration changes by restoring the BIOS configuration

to its last saved working or factory default configuration. For more details, see

“Restore

the Backed Up BIOS Configuration or Reset BIOS to Factory Defaults (Oracle

ILOM)” on page 133

■

Verify that the current BIOS configuration settings on the host are in sync with the

configuration settings stored by Oracle ILOM. If necessary, you can sync the host

BIOS settings with Oracle ILOM. For more details, see

“Sync the Host BIOS Firmware

Configuration (Oracle ILOM)” on page 134

Backing Up and Restoring Firmware Configurations and BIOS Settings

131

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands