Oracle X4 series Administration Manual Download Page 135

Page: 135 / 240

Backing Up, Restoring, or Replicating the Oracle ILOM Firmware Configuration

This procedure provides web and command-line interface (CLI) instructions for the server

service processor (SP).

To identify the sync status or to manually sync the host BIOS configuration with

Oracle ILOM:

■

From the Web interface:

Click System Management > BIOS.

Perform one or both of the steps below:

■

To view the current sync status, locate the Configuration Sync Status field at the

top of the page.

■

To sync the host BIOS settings with Oracle ILOM, power cycle the host system

by clicking Host Management > Power Control > Power Cycle.

■

From the CLI:

■

To view the current sync status, type:

show /System/BIOS/Config

■

To manually sync the host BIOS settings with Oracle ILOM, type:

reset /System

See Also

■

Performing BIOS Configuration Tasks,

Oracle ILOM Configuration and Maintenance

Guide

for firmware version 3.1 or 3.2.

■

For BIOS screen details, see your server service manual.

Backing Up, Restoring, or Replicating the Oracle ILOM

Firmware Configuration

When the Oracle Integrated Lights Out Manager (ILOM) firmware configuration changes on an

Oracle server service processor (SP) or chassis monitoring module (CMM), use Oracle ILOM

to do the following:

■

Back up the Oracle ILOM configuration to prevent the loss of the current working

configuration settings. For more details, see

“Back Up the Current Oracle ILOM Firmware

Configuration (Oracle ILOM)” on page 136

Backing Up and Restoring Firmware Configurations and BIOS Settings

135

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands