E1000 with 10G Fiber Expansion Card:
Port 9 Port 10
16
Port 9:
10 Gigabit Ethernet (non-bypass)
Port 10:
10 Gigabit Ethernet (non-bypass)
Note: Ports 9 and 10 should only be configured with Bypass Mode set as Fail-to-Block on an E1000 with 10G Fiber expansion card.
The 10G Fiber expansion card does not support Fail-to-Wire, and the Talari service will not start if a configuration specifying Fail-to-
Wire for these ports is applied to an E1000 with 10G expansion card.
Version 1.1
Summary of Contents for Talari E1000
Page 24: ...Version 1 1 2 3 ...
