E1000 with No Expansion Card:
Port 1 Port 2 Port 3 Port 4
Port 5 Port 6 Port 7 Port 8
Installation Options
Easy 1st Install
Important Note:
If the Talari configuration for the E1000 does not match the installed hardware
(for example, if the appliance is an E1000 with No
Expansion Card and an interface between 9 and 12 is configured),
the Talari service be disabled when the package is applied
,
and the appliance will need to be factory defaulted before Easy 1
st
Install can be attempted again.
Valid ports for each hardware option are
highlighted in green below,
while invalid ports are indicated with a red
symbol:
Port 1:
Gigabit Ethernet (Bypass pair with Port 2)
Port 2:
Gigabit Ethernet (Bypass pair with Port 1)
Port 3:
Gigabit Ethernet (Bypass pair with Port 4)
Port 4:
Gigabit Ethernet (Bypass pair with Port 3)
Port 5:
Gigabit Ethernet (non-bypass)
Port 6:
Gigabit Ethernet (non-bypass)
Port 7:
Gigabit Ethernet (non-bypass)
Port 8:
Gigabit Ethernet (non-bypass)
Version 1.1
1 5
Summary of Contents for Talari E1000
Page 24: ...Version 1 1 2 3 ...
