Figure 29: Video Connector
Table 8: Video Connector Pin-Out
Signal
Pin #
Red (analog color signal R)
1
Green (analog color signal G)
2
Blue (analog color signal B)
3
No connection
4
GND
5
GND
6
GND
7
GND
8
Fused Vcc (+5V)
9
GND
10
No connection
11
DDCDAT
12
HSYNC (horizontal sync)
13
VSYNC (vertical sync)
14
DDCCLK
15
Universal Serial Bus (USB) Interface
The server board provides four USB ports. USB ports 0 and 1 are brought to the rear. USB ports 2 and
3 are routed to the front panel board where USB port 2 is brought to the front of the system and USB
port 3 is used internally for interfacing to the optional Intel
®
Z-U130 Value Solid State Drive. The
built-in external USB ports permit direct connection of three USB peripherals without an external hub.
If more devices are required, an external hub can be connected to any of the built-in ports.
Figure 30: External USB Connector
58
910-5680-001 Revision F, February 2014
External Hardware Connections
Platform Maintenance