Installing the Server Into a Rack
This section describes how to place the server into a rack using the rail assembly in the
rackmount kit. Perform these procedures if the rail assembly is purchased.
Note -
In this guide, the term rack means either an open rack or a closed cabinet.
Description
Links
Review safety precautions.
“Safety Precautions” on page 33
Review the compatibility requirements for your rack.
“Rack Compatibility” on page 34
Install mounting brackets onto the server.
“Install Mounting Brackets” on page 35
Attach the tool-less slide-rail assembly to the rack.
“Attach Slide-Rail Assemblies ” on page 36
Install the server into the slide-rail assembly.
“Install Server Into the Slide-Rail
(Optional) Install the cable management arm for routing
server cables.
“Install Cable Management Arm” on page 43
Verify that the slide-rails and cable management arm are
working correctly.
“Verify Operation of Slide-Rails and
Safety Precautions
This section describes safety precautions you must follow when installing the server into a rack.
Caution -
Equipment damage or personal injury. Always load equipment into a rack from the
bottom up so that the rack will not become top-heavy and tip over. Deploy your rack's anti-tip
bar to prevent the rack from tipping during equipment installation.
Installing the Server Into a Rack
33
Summary of Contents for Sun Server X4-4
