Oracle Sun Server X4-4, Installation Manual

Page: 35 / 148

Install Mounting Brackets
Item Requirement
Distance between front and rear mounting planes Minimum 610 mm and maximum 915 mm (24 inches to
36 inches).
Clearance depth in front of front mounting plane Distance to front cabinet door is at least 25.4 mm (1
inch).
Clearance depth behind front mounting plane Distance to rear cabinet door is at least 900 mm (35.5
inches) with the cable management arm, or 770 mm
(30.4 inches) without the cable management arm.
Clearance width between front and rear mounting planes Distance between structural supports and cable troughs is
at least 456 mm (18 inches).
Server dimensions Depth: (not including PSU ejectors): 732 mm (28.8
inches).
Width: (not including ears): 436.5 mm (17.2 inches).
Height: 129.9 mm (5.1 inches).
Install Mounting Brackets
To install the mounting brackets onto the sides of the server:
1. Position a mounting bracket against the chassis so that the slide-rail lock is
at the server front, and the five keyhole openings on the mounting bracket are
aligned with the five locating pins on the side of the chassis.
Installing the Server Into a Rack 35