1-1
C H A P T E R
1
Parts Removal and Installation
This chapter contains procedures for replacing the internal hardware components
for the Sun Fire V125 server. The procedures in this section are for qualified service
engineers only.
Caution –
Read
Section 1.8, “System Configuration Card Reader” on page 1-13
, and
wear a properly grounded antistatic strap, before you carry out any of the
procedures in this document.
The chapter contains the following sections:
■
Section 1.1, “Replaceable Components” on page 1-2
■
Section 1.2, “Controlling Server Power” on page 1-2
■
Section 1.3, “Avoiding Electrostatic Discharge” on page 1-3
■
Section 1.4, “Opening the Server” on page 1-5
■
Section 1.5, “Location of Components” on page 1-10
■
Section 1.6, “Front Bezel Assembly” on page 1-10
■
Section 1.7, “Hard Drives” on page 1-11
■
Section 1.8, “System Configuration Card Reader” on page 1-13
■
Section 1.9, “Power Supply Unit” on page 1-15
■
Section 1.10, “Memory” on page 1-16
■
Section 1.11, “Fans” on page 1-18
■
Section 1.12, “CPU, Heat Sink, and System Board Assembly” on page 1-20
■
Section 1.13, “Lower Interface Board Assembly” on page 1-23
■
Section 1.14, “PCI Cards” on page 1-25
■
Section 1.15, “Sun Cryptographic Accelerator” on page 1-27
■