manualshive.com logo in svg

Oracle SPARC T5-1B, Service Manual

Share
Download
Oracle SPARC T5-1B Service Manual Download Page 97

Transfer Components to the New Enclosure Assembly

See 

“Returning the Server Module to Operation” on page 99

.

11.

Insert the completed enclosure assembly in the same slot as the original server

module.

See 

“Returning the Server Module to Operation” on page 99

.

12.

Start the server module host.

See 

“Powering On the Host” on page 102

.

13.

Access Oracle ILOM on the SP.

See 

“Log Into Oracle ILOM (Service)” on page 21

.

If the replacement SP detects that the SP firmware is not compatible with the existing host

firmware, further action is suspended and this message is displayed:

Unrecognized Chassis: This module is installed in an unknown or
unsupported chassis. You must upgrade the firmware to a newer
version that supports this chassis.

If you see this message, go to 

Step 14

. Otherwise, go to 

Step 15

.

14.

Download the system firmware.

Refer to 

Servers

 

Administration

, Updating Firmware and to Oracle ILOM documentation for

instructions.

15.

Perform diagnostics to verify the proper operation of the server module.

See 

“Detecting and Managing Faults” on page 17

.

16.

Transfer the serial number and product number to the FRUID of the new

enclosure assembly.

This must be done in a special service mode by trained service personnel.

Note - 

The replacement enclosure assembly does not have a label with the serial number on the

front of the server module, as was present on the original server module.

17.

(Optional) Update any customer database that contains RFID data.

Use the values from the RFID on the new enclosure assembly.
The RFID on the original server module contains different values.

18.

Consider your next step:

Servicing the Enclosure Assembly (Motherboard)

97

Summary of Contents for SPARC T5-1B



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands