manualshive.com logo in svg

Oracle SPARC T5-1B, Service Manual

Share
Download
Oracle SPARC T5-1B Service Manual Download Page 107

NMI

IP

Internet Protocol.

K

KVM

Keyboard, video, mouse. Refers to using a switch to enable sharing of one keyboard, one

display, and one mouse with more than one computer.

L

LwA

Sound power level.

M

MAC

Machine access code.

MAC address

Media access controller address.

modular

system

The rackmountable chassis that holds server modules, storage modules, NEMs, and PCI EMs

(server modules only). The modular system provides Oracle ILOM through its CMM.

MSGID

Message identifier.

N

name space

Top-level Oracle ILOM target.

NEBS

Network Equipment-Building System (Netra products only).

NEM

Network express module (server modules only). NEMs provide Ethernet and SAS connectivity

to storage modules.

NET MGT

Network management port. An Ethernet port on the server SP, the server module SP, and the

CMM.

NIC

Network interface card or controller.

NMI

Nonmaskable interrupt.

Glossary

107

Summary of Contents for SPARC T5-1B



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands