manualshive.com logo in svg

Oracle SPARC T5-1B, Service Manual

Share
Download
Oracle SPARC T5-1B Service Manual Download Page 34

Check for Faults

   Manufacturer   : Oracle Corporation
   Name           : SPARC T5-1B
   Part_Number    : 7023631-04
   Serial_Number  : 1219EK001X
 
----------------------------------------
Suspect 1 of 1
   Fault class  : fault.memory.dimm-ue
   Certainty    : 100%
   Affects      : /SYS/MB/CM0/CMP/BOB6/CH1/D0
   Status       : faulted but still in service
 
   FRU
      Status            : faulty
      Location          : /SYS/MB/CM0/CMP/BOB6/CH1/D0
      Manufacturer      : Samsung
      Name              : 8192MB DDR3 SDRAM DIMM
      Part_Number       : 07042208,M393B1K70DH0-YK0
      Revision          : 02
      Serial_Number     : 00CE0212133341DB80
      Chassis
 
Description : Description associated with fault.memory.dimm-ue
 
Response    : Response associated with fault.memory.dimm-ue
 
Impact      : Impact associated with fault.memory.dimm-ue
 
Action      : Use 'fmadm faulty' to provide a more detailed view of this
              event. Action associated with fault.memory.dimm-ue Please
              refer to the associated reference document at
              http://support.oracle.com/msg/SPSUN4V-8000-F2 for the latest
              service procedures and policies regarding this diagnosis.

In this example, a fault is displayed, indicating these details:

■

Date and time of the fault (

2013-01-08/12:13:42

).

■

UUID (

59b2d926-4896-e979-e85c-cfedb5daedf5

), which is unique for every fault.

This is sometimes identified as an Event ID.

■

Message identifier (SPSUN4V-8000-F2), which can be used to obtain

additional fault information.

■

Faulted component, including these details:

34

SPARC T5-1B Server Module Service Manual • February 2019

Summary of Contents for SPARC T5-1B



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands