Assembling the Battery Enclosure
The Enclosure for Battery (optional) enables select Oracle MICROS workstations to
operate using battery power.
Initial setup:
1.
Remove the enclosure cover by unscrewing the two captive screws using the hex
wrench included with your workstation.
Figure 4-1 The Enclosure for Battery
2.
Insert the battery into the enclosure by carefully aligning the battery power
contacts (1) with the battery terminals. Gently press down on the battery to secure
the connection.
Figure 4-2 Inserting the Battery in the Enclosure for Battery
3.
Replace the enclosure cover, and then tighten the two captive screws.
Chapter 4
Assembling the Battery Enclosure
4-11
