Performing a Factory Reset from BIOS (Oracle Linux for MICROS)
This method applies to all 625/655 workstations running Oracle Linux for MICROS. To
perform system recovery from the BIOS:
1.
Power on or restart the workstation.
2.
Enter the BIOS.
a.
Tap the lower left or lower right portion of the bootup screen to enter the BIOS
Configuration Utility
3.
Tap the Oracle Workstation option.
4.
From the list of options on the left scrolling panel, select Factory Recovery, and
then select Enabled from the drop-down list.
5.
Tap Home.
6.
Tap Save and Exit, tap Exit Saving Changes, and then tap Yes to confirm. The
workstation restarts automatically.
7.
The workstation reboots and the “Entering Recovery Mode” message appears.
8.
When the “The system will reset Oracle Linux to Factory Default……Are you sure
to continue? (Y/N)” message appears, type y, and then press Enter.
9.
The recovery process begins.
Performing a Factory Reset using the Recovery Button
You can use the system recovery button to restore system settings without using a
keyboard. This method applies to all 625/655 workstations and all operating systems.
1.
Power off the workstation. Do not disconnect the power cable.
2.
Locate the recovery button on the back of the workstation, as shown in the
following image.
Chapter 12
System Recovery
12-7
