Figure 194: LED alarm assembly front display
Legend
1 Chassis identification LED or Locator
LED
5 Service processor LEDs
2 Service Action Required LED or
Caution or Fault LED
6 Back power supply LED
3 Motherboard or Power or OK LED
7 Fault or Alarm LEDs (Critical, Major,
Minor)
4 Power switch
8 User Alarm LED
The following table provides status information on the LEDs on the front display
panel of the LED alarm assembly on the Controller:
Table 31: Controller LED status and description (front panel)
No.
LED
LED color
Status
1
Chassis
identification LED
or
Locator LED
button
White
The Locator LED can be turned on to
identify a particular system. When on,
the LED blinks rapidly. Pressing and
holding the Locator button for 5
seconds lights up all the LEDs that are
controlled by ILOM for 15 seconds.
2
Service Action
Required LED
Amber
Indicates that service is required.
Under some fault conditions,
individual component fault LEDs are
turned on in addition to the Service
Required LED.
Oracle FS System LED Status
242