Install a New Oracle F160 Flash Card (Server Power-On)
c.
Power on the system.
The card hardware insertion is complete
9.
Configure the server for the new Oracle F160 Flash Card.
Refer to the servers administration guide or the OS documentation.
a.
If applicable, perform any required commands for your system to install the
device driver for the new Oracle F160 Flash Card.
b.
If applicable, perform any required commands for your system to recognize
the new Oracle F160 Flash Card.
c.
Verify successful installation of the Oracle F160 Flash Card through your
server operating system.
When the installation is complete, the Oracle Flash Accelerator F160 PCIe Card is visible
to your server operating system.
d.
Configure the system to maximize flash technology.
Related Information
■
“Oracle Flash Accelerator F160 PCIe Card Optimization Guidelines” on page 26
■
■
“Installation Overview” on page 29
■
“Oracle F160 Flash Card Service Overview” on page 37
Install a New Oracle F160 Flash Card (Server Power-On)
To install a new Oracle Flash Accelerator F160 PCIe Card into a supported server when the
card is hot plug inserted into an empty PCIe carrier:
Note -
Refer to the server's service manual for PCIe card installation instructions.
1.
Prepare the Oracle F160 Flash Card for installation.
“Preparing the Oracle F160 Flash Card for Installation” on page 21
.
2.
Back up your data, as required, before changing your server configuration.
Installing the Oracle F160 Flash Card
33