Replace Oracle F160 Flash Card (Server Power-Off)
Install the bracket screw, as required to secure the card to the server chassis.
Or: engage the server retention mechanism to secure the card to the server chassis.
11.
Return the server to service.
Refer to the server's service manual.
a.
Replace the cover.
Your server chassis might use another configuration. Refer to the server's service manual
for instructions.
b.
Reconnect the power cord and any network cables.
c.
Power on the system.
The card hardware insertion is complete.
12.
Configure the Oracle F160 Flash Card and verify drive availability.
■
Follow the server's service manual instructions for Oracle F160 Flash Card NVMe storage
drive configuration and identification.
■
Use appropriate software commands to return the system to an operational state:
■
Power on the Oracle F160 Flash Card as required.
■
Attach a device driver as required.
■
Re-activate mirror if manual intervention is required.
■
Re-sync mirror if manual intervention is required.
13.
Verify that:
■
The Fail LED is not lit .
■
The green Health LED is lit on the card that you installed.
See
“Status Indicators” on page 13
Related Information
■
“Servicing the Oracle F160 Flash Card Using Oracle Hardware Management
■
44
Oracle Flash Accelerator F160 PCIe Card User Guide • April 2016