1.
At the ACLI password prompt, enter the default system User password and press
<return>. Your entries are not echoed on the screen.
User Access Verification
Password:
ACMEPACKET>
From the User prompt you can view various configuration states and operating
statistics on the Acme Packet 6300/6350 System, but you perform configuration
tasks.
2.
Type enable and press return to enter Superuser mode. The prompt to enter the
superuser password appears.
ACMEPACKET> enable
Password:
3.
Enter the Superuser password and press return. The system prompt ends with a
pound sign instead of a closed-angle-bracket to let you know are in Superuser
mode.
Password:
ACMEPACKET#
4.
You can now begin configuring your Acme Packet 6300/6350 System. Refer to the
Acme Packet Configuration Guide to learn how to establish an IP address for your
Acme Packet 6300/6350 System.
If you have any questions about booting or powering on your system, contact your
Acme Packet customer support representative directly.
Formatting the Solid State Drive
After the initial log on to the device, you must format the Solid State Drive. Details
on file system designs and the formatting procedure may be found in the File System
Maintenance chapter of the Maintenance and Troubleshooting Guide.
Chapter 5
Initial Login
5-3