Ethernet Link LED (left) and Activity LED (right)
Link LED
The link LED illuminates orange when a link has been established between the link
partner device and the SBC.
Activity LED
The activity LED is located to the top right side of the Ethernet port. It illuminates green
when an Ethernet connection has either transmit or receive packet activity.
Upon initial bootup, these Ethernet ports are not configured. You must first connect
to the Acme Packet 6300/6350 over a serial connection before you can configure
the management Ethernet ports for use. You set up the management interfaces
using the physical and network interface configuration elements. Refer to the System
Configuration chapter of the Acme Packet Configuration Guide for details.
Once the management network interface is configured, it should be reserved for the
following:
•
Maintenance activities
•
Application log retrieval
•
Software upgrades
•
System configuration
Chapter 2
Option Card Slots
2-12