Oracle 1242 User Manual Download Page 31

Page: 31 / 84

Installing the Rack

These topics describe how to position, stabilize, and ground the rack.

■

“Installation Task Overview” on page 31

■

“Rack Packaging” on page 32

■

“Tools Required” on page 33

■

“Move the Rack to the Installation Site” on page 35

■

“Stabilize the Rack (Leveling Feet)” on page 36

Related Information

■

“About the Rack” on page 11

■

“Specifications” on page 15

■

“Preparing for Rack Installation” on page 23

■

“Preparing PDUs” on page 37

■

“Preparing to Install or Service Equipment” on page 41

■

“Returning the Rack to Operation” on page 51

■

“Servicing the Rack” on page 55

Installation Task Overview

Follow these general steps when preparing to position, stabilize, and ground the rack.

Steps

Description

Links

Unpack the rack.

“Rack Packaging” on page 32

Move the rack to the installation site.

“Move the Rack to the Installation

Site” on page 35

Stabilize the rack.

“Stabilize the Rack (Leveling

Feet)” on page 36

Installing the Rack

Summary of Contents for 1242





















































































Search results

Summary of Contents for 1242

Reviews:

Related manuals for 1242

Brands by name

Popular brands

Oracle 1242, User Manual

Search results

Summary of Contents for 1242

Reviews:

Related manuals for 1242

Brands by name

Popular brands