7. Connect the power cable to the power connector on the system.
8. Connect the Petro-Net cable at this time. (Black wire to Terminal 1; White wire to Terminal 2).
Figure 2-2 FIT-Mounted Modem: Inside View
9. Place the modem on the bottom of the FIT cabinet, connect the power and Petro-Net connectors.
10. Route the 1-foot antenna cable through the .375-inch hole to the .25-inch hole in the pedestal.
11. Seal the hole in the FIT with silicone
Figure 2-3 FIT Remote Antenna: Outside View
2.2.3 FIT with Remote Antenna (Recommended)
The Wireless Modem can also be set up with a remote antenna. For remote antenna mounting, attach the
directional antenna to a pole or other surface using the supplied mounting brackets. Connect the 20- foot
antenna cable to the modem or to the 1-foot cable in the FIT. When mounting the antenna remotely be sure
to protect the antenna cable with the appropriate conduit.
Doc. No.: M00-20-7074 Rev.: 6
Page 13 of 43
Summary of Contents for M00-20-7074
Page 43: ......
