Point to Point Factory Configuration
The Point to Point factory configuration settings are shown in the illustration above.
3.4 FSC to Multiple FIT Operation (3 or More Wireless Modems)
NOTE:
If you only have two (2) wireless modems, you do not have to configure the modems
and you can proceed with the installation instructions. The modems are pre-configured for use
with one (1) or two (2) modems.
If you have three (3) or more wireless modems, continue with the configuration instructions that
follow.
When you configure these modems with the XTC software, set DIP switches to #1, #5/#6 ON and all others
OFF. For normal operation, #5/#6 ON and all the rest OFF.
NOTE:
Each modem must be configured for its EXACT location.
Doc. No.: M00-20-7074 Rev.: 6
Page 24 of 43
Summary of Contents for M00-20-7074
Page 43: ......
