Opvimus UMX-03/0, Operating Instructions Manual

Page: 21 / 28

UMX-03/0 version 4.3.000.5
21
Modular audio matrix
with IP connection
UMX-03/0
COMPONENT
GENERATING
THE ALARM
TYPE OF ALARM DESCRIPTION RECOVERY
ME-200B NOT DETECTED Module ME-200B is not detected. If the UMX-03/0 incorporates the ME-
200B module, disconnect the power
supply and check the internal connec-
tions between the ME-200B module and
the UMX-03/0.
If the UMX-03/0 does not incorporate
an ME-200B module, disable this func-
tionality in the unit's web configuration.
"NAME OF THE
CONTACT"
SHORT CT ERR. A short-circuit is detected in the
connection of a contact configured to
be monitored.
Check the connection of the contact.
If the contact must not be monitored,
modify the configuration of the contact
via the
P.A. Manager
software.
"NAME OF THE
CONTACT"
OPEN CT ERR. An open contact is detected in the
connection of a contact configured to
be monitored.
Check the connection of the contact.
If the contact must not be monitored,
modify the configuration of the contact
via the P.A. Manager software.
"PERSONALISED
TEXT TO NOTIFY
AN ALARM"
A contact may be configured so its
activation will generate an alarm on the
screen with the desired text.
S ["n"]
(n= Number of
slave, id.)
NOT DETECTED The system does not detect a UMX-
03/0E unit that appears in the
configurations of the installation.
Check the CAN bus connection between
the UMX-03/0E unit and the UMX-03/0.
If the unit is not physically present,
check the configuration of the
installation in the
P.A. Manager
software to verify that a UMX-03/0E
unit has not been added by error. If so,
delete it.
S ["n"]
(n= Number of
slave, id.)
CONFIGURATION
ERROR
The system detects a UMX-03/0E unit
that does not appear in the
configurations of the installation.
Use the
P.A. Manager
software to add
the unit to the installation tree.
or
disconnect the unit from the CAN bus
C ["n":"p" ]
(n= Number of
slave, id.)
If the value is 0,
the unit is a
UMX-03/0)
(p= lot occupied
by the card)
NOT DETECTED The unit "n" incorporates a card in slot
"p" that is not detected by the system,
although it does appear in the
configurations of the installation.
Check that the card is physically present
and is properly inserted
or
the card is missing. From the
P.A.
Manager software, delete the card from
the installation tree.