Bottom film loading - follow the same way as the top film loading.
7. Set the temperature and Speed.
8. When "Ready" is displayed, paste the inserted the paper to the film.
9. Down the roller tension handle.
10. Set the Idle Bar_Anti Curling in the each steps for the material thickness
12. It might be better to use the wasted paper in the first lamination.
Perforator
Idle Bar-Anti Curling
Slitter
Idle Bar-Table
Paper
7 TEMPERATURE AND SPEED MEMORY SETTINGS
You can set the temperature and speed for your convenient work through MEMO butto
You will receive the machine which set in factory. But you can change the MEMO value
from 1~2.
Factory pre-set memory value
6. TEMPERATURE AND SPEED MEMORY SETTINGS
You can set the temperature and speed for your convenient work through MEMO butto
You will receive the machine which set in factory. But you can change the MEMO value from 1~2.
►
Factory pre-set memory value
MEMO
Temp(
℃
)
TOP /
BOTTOM
Speed/
Memo
1
110
3
110
1
2
120
3
120
2
COLD
40
3
0
3
How to change memory value
1. Press MEMO 1 button for 2 seconds,
then flicker Temperature and Speed.
2 Up and down temperature and speed
3. Press 1 ~ 2 button
4. COLD button is changeable.
- same function of MEMO 1, 2
! Attention
: If you don't use for 1 hours, the temperature will go to 85
℃
of temperature.
Also when you press the StBy button, the temperature will go to 85
℃
of temperature.
Finally if you don't use 1 hours after StBy mode, the power will be shut down
automatically.
How to change memory.
1. Press MEMO 1 button for 2 seconds, then flicker
Temperature and Speed.
2. Up and down temperature and speed.
3. Press 1 ~ 2 button.
4. COLD button is changeable. - same function
of MEMO 1, 2.
Attention: If you do not use for 1 hours,
the temperature will drop to 85 C .
When you press the STBY button, the temperature will go to 850C.
If you do not use the equipment for 1 hours after pressing the STBY mode, the power
will switch off automatically.
16
Summary of Contents for RolLAM 380 Super
Page 10: ...10...
