OPUS RolLAM 720, 380 Super • User guide
EN
13
2 RECOMMENDATIONS
• Use only recommended supplies and accessories from OPUS.
• The equipment is designed for laminating foil from 25 – 250μm. Do not use lower or
higher thickness.
• Laminating with the one layer of foil requires using a carrier.
• Individually cut foil can damage and make the rollers dirty and cause the foil to wind
around the rollers.
• Remove all metal elements (clips, clamps and staples etc.) before laminating documents.
• Do not laminate inflammable, glues and easy-melting materials.
NOTE! Not complying with the recommendations above can result with warranty void.
3 STAND INSTALLATION*
• The stand is delivered in a separate package. It consists of two legs and 1 crossbar.
• Connect crossbar** to the legs using the 4 bolts provided.
• Then put the laminator on the stand and fix together with the bolts supplied.
* For the RolLam 380 Super, the stand is optional.
** For the RolLam 720 Super the crossbar is in the box with the device.
3.
Construction of the device
4.
Control panel
When the machine is initially turned on, the LCD window will display the last working preset
memory setting.
4 CONSTRUCTION OF THE DEVICE
Emergency
Switch
Guide
Safety Cover
Guide Table
Control Panel
Roller Tension Handle
Knob for FIlm Tension
Film Top
Slitter
Summary of Contents for RolLAM 380 Super
Page 10: ...10...
