PAGE: 4
For coupling the DO35 to your vehicle, we recommend the following:
•
Ensure Tow Pin Cover is removed from Tow Pin.
•
Make sure Tow Pin and Universal mating surfaces free of sand, dirt
and foreign objects, and is lightly lubricated.
•
Raise height of trailer coupling above vehicle Tow Pin by adjusting
Jockey Wheel or Stand.
•
Push and hold Lock Button down (push the Lock Plate to full open
position until the Lock Button is able to spring back)
DEPRESS RED BUTTON FOR SPRING LOADED SLIDE TO LOCK COUPLING TO VEHICLE
ENSURE TOW PIN PROTRUDES THROUGH LOCKING MECHANISM BEFORE ATTEMPTING TO LOCK
•
Assemble the Checklock cap by snapping in the back edge of the
cap first and then pushing down on the front. The cap will emit an
audible snap when assembled correctly.
•
Align Coupling over Tow Pin by moving either vehicle or trailer, and lower coupling onto Tow Pin. Ensure that Universal is
fully seated on Tow Pin; Ensure Tow Pin protrudes through locking plate.
•
Push the Lock Button to release the plate into the locked position.
COUPLING UNLOCKED
POSITION, TOW PIN
HOLE MUST BE CLEAR
ATTACH CAP FROM THE REAR FIRST FOR EASIER FITMENT
PRESS FRONT OF CAP FIRM AND ENSURE SNAP FIT.
DO35 CRUISEMASTER
HITCHING-UP
HITCHING-UP
ABOUT YOUR HITCH
VEHICLE SIDE HITCH
PROTECTIVE COVER
DO35
CRUISEMASTER
HITCH
SARACEN
DO35 HITCH
LOCK
