Cautions
Avoid abrupt changes of the ambient temperature.
In case of problems or questions which may arise when you use the CS, please contact our service department.
Read the manual carefully before the initial start-up. The producer reserves the right to change the herein
described specifications in case of technical advance of the product.
Factory Default Settings
The unit has the following presetting at time of delivery:
Emissivity:
0,950
Transmission:
1,000
Average
time:
0,3
s
Smart averaging:
active
Smart averaging hysteresis:
2 °C
Ambient temperature source:
internal (head)
Status-LED function:
Self
diagnostic
Input (IN/ OUT/ green):
Communication input
Output (OUT/ yellow):
mV output
Temperature range:
0...350 °C
optris CS – E2010-12-A
4
Output
voltage:
0...3,5
V
Vcc
adjust:
inactive
Signal processing:
Hold mode:
off
Calibration:
Gain
1,000/
Offset
0,0
The default settings can be changed with the
optional USB kit (USB adapter cable + software).
If the unit is supplied together with the USB-kit the
output is already preset to digital communication
(bidirectional).
Failsafe:
inactive
