Description
The sensors of the optris CS series are non-contact infrared temperature sensors.
They calculate the surface temperature based on the emitted infrared energy of objects
[
►
Basics of Infrared
Thermometry]
.
The sensor housing of the optris CS is made of stainless steel (IP63) and contains the complete sensor
electronics. The optris CS has a fixed mounted connection cable.
The sensors CS are sensitive optical systems. Please use only the thread for mechanical installation.
Avoid mechanical violence on the head – this may destroy the system (expiry of warranty).
Scope of Supply
CS incl. connection cable, two mounting nuts and operators manual
Maintenance
Lens cleaning:
Blow off loose particles using clean
compressed air. The lens surface can be cleaned with a soft,
humid tissue moistened with water or a water based glass
cleaner.
PLEASE NOTE: Never use cleaning
compounds which contain solvents
(neither for the lens nor for the housing).
optris CS – E2010-12-A
3
