optris BR 20AR, Operator'S Manual

Page: 17 / 28

-
Installation 17
-
3.2 Configuration
After having connected your Hardware, you can
start with the configuration in the PIX Connect
software. To do this, go to the
Referencing tab
under Tools and Configuration . Under Reference
temperature and Source , select External probe .
Now select under Compare with measuring area
the measuring area that should correspond to the
reference area. This measuring area must be
located in the reference source. The remaining
options do not require further adjustments.
Figure 9: Configuration in PIX Connect software
The software already contains a predefined layout called "Fever Inspection with Ref". You can
load this layout under Tools and Load layout and use it as a presetting.