OTS Series Command Line Interface User Guide
Page 93 of 95
which access is set, it is not possible to access the system for writing for SNMP Manager. The telnet attribute
means to allow the host access system by telnet.
【
Example
】
1. Adding the telnet attribute to the host that the name is test
2. Deleting the telnet attribute about the host that the name is test, but not the host name in the host access
control list.
3. Deleting the host in the host access control list.
configure interface
【
Format
】
configure interface < >
configure interface <shelf/slot/port> edfa administration disable
configure interface inband <shelf> administration disable
This command disables the port INBAND. In the disable state, the port cannot receive and send packets. To
enable the ports, use the ‘no’ command. Slot range is 1~16, and port is 1~2. The default value is enabled.
configure interface inband <shelf> name <”string”>
This command configures INBAND port name. To set the ports name to default, use the ‘no’ command. Slot
range is 1~16 and port is 1~2.
configure interface <shelf/slot/port> sh/lh loopback terminal
<>/
peer
configure interface <shelf/slot/port> edfa gain <x-y>
This command sets optical gain of EDFA cards. The PA gain range is 20~30dB, and the PA default is 25dB;
The BA gain range is 12~18dB, and the BA default is 15dB; The LA gain range is 20~30dB, and the LA
default is 25dB. The interface administration default disables.
【
Example
】
192.168.0.144:> configure host-management OTS series attribute add telnet
192.168.0.144:> configure host-management OTS series attribute add rw
192.168.0.144:> no configure host-management OTS series
192.168.0.232:> configure interface
<shelf/slot/port> if index,support 1-n/1-m or 1,x/1-w,z
inband inband port
