OTS Series Command Line Interface User Guide
Page 86 of 95
【
Display explained in detail
】
Parameter
Description
Idx
id
：
West/shelf
，
East/shelf
，
LH shelf/slot/port
，
SH shelf/slot/port Shelf: 1-4
slot: 1-16 port: 1-8.
Service
IS: In Service means that interface is normal.
OOS: Out Of Service means something wrong at the interfaces
Admin
Interface Management Status: enable, disable, The default value is enable
Mode/Status
Mode is either protection switch, working, or standalone.
Active or non-active port.
Filter Time
Time to execute protection switch.
【
Format
】
configure psw <shelf/slot/port> <administration/time/mode>
configure psw <shelf/slot/port> administration enable
This command enables the administration privileges of the port. Default is enabled.
configure psw <shelf/slot/port> time
This command configures the time it takes for protection switching to occur.
configure psw <shelf/slot/port> mode standalone
configure psw <shelf/slot/port> mode working
configure psw <shelf/slot/port> protection
These commands adjust which mode the port of the system is currently running in whether it is standalone,
working, or protection.
【
Example
】
192.168.0.144:> configure psw 1/1/1 administration enable
192.168.0.144:> configure psw 1/1/1 time 8
192.168.0.144:> configure psw 1/1/1 mode standalone
192.168.0.144:> configure psw 1/1/1 mode working
192.168.0.144:> configure psw 1/1/1 mode protection
*192.168.0.232:> configure psw
<shelf/slot/port> - supports 1-n/1-m or 1,x/1-w,z
