OTS Series Command Line Interface User Guide
Page 11 of 95
2.
System Configuration
2.1
System Configuration Commands
This chapter lists the System configuration commands. System configuration commands are used to change or navigate
to a different set of commands to manage features or components of the system. The system configurations are classified
into different categories based on the system feature or component to be managed.
2.1.1
System Configuration Parameters
Category Item
Main Setting Items
1
Date and time setting
2
Terminal screen setting (No. of display lines, edit mode, prompt, etc.)
3
Configuration of OTS series IP addresses, sub-net mask, route information, including out band and in
band
4
Interface configuration (Active/inactive of short haul/long haul/sc port, transmission speed of short
haul and long-haul port, interface name of short haul/long haul/sc)
5
Username/password configuration
6
System information configuration (System Name, Contact, Description)
7
SNMP manager related information
8
Configuration of access restriction
9
NTP configuration
10
SYSLOG configuration
2.2
System Configuration Settings
(1) Parameter is reflected immediately after setting and saved even after system reboots.
(2) Parameter is reflected immediately after setting, however is cleared during reboot. If the write flash-memory command
is not used to write the setting in memory, the value will be cleared at reboot.
2