background image

31

English

User Controls

Auto

If this format is select, Screen type will auto become 

16:10 (1920 x 1200)

If source is 4:3, auto resize to 1600 x1200

If source is 16:9 auto resize to 1920x1080

If source is 16:10 auto resize to 1920x1200

16:9 Screen

480i/p

576i/p

1080i/p

720p

PC

4:3

1440 x 1080 center

16:9

1920 x 1080 center

LBX

1920 x 1440 center, then get the central 1920 x 1080 

image to display

Native

No resize image, 1:1 mapping and centered. This format 

shows original image without scaling.

Auto

If this format is select, Screen type will auto become 16:9 

(1920x1080)

If source is 4:3, auto resize to 1440 x1080

If source is 16:9 auto resize to 1920x1080

If source is 16:10 auto resize to 1920 x 1200 and cut 

1920x1080 area to display

  Zoom (Digital Zoom)

 Press the 

 to reduce the size of an image.

 Press the 

 to magnify an image on the projection screen.

  Edge Mask

Edge mask function removes the noise in a video image. Edge 

mask the image to remove video encoding noise on the edge of 

video source.

  H Image Shift

Shift the projected image position horizontally. 

  V Image Shift

Shift the projected image position vertically. 

  H Keystone

Press the   or 

 to adjust image distortion horizontally. If the image 

looks trapezoidal, this option can help make the image rectangular.

  V Keystone

Press the   or 

 to adjust image distortion vertically. If the image 

 

16:9 or 16:10 

depend on “Screen 

Type” setting.

 

 16:9 screen type 

is not supported 

when input source 

is 1920x1200  or 

1600x1200.

 

Each I/O has 

different setting of 

“Edge Make”.

 

“Edge Make” and 

“Zoom” can’t work at 

same time.

Summary of Contents for PRO8000







































































Reviews: