14
English
Installation
12V OUT
RS232
R
G
B
H
V
S-VIDEO
VIDEO
Y
Pb
Pr
RJ45
HDMI 2
HDMI 1
VGA-OUT
VGA 2-IN
VGA 1-IN
SOURCE
INFO.
MENU
AV MUTE
ENTER
RE-SYNC
LENS
SHIFT
FOCUS
ZOOM
Powering the projector On / Off
Turn on the
projector first and
then select the
signal sources.
Powering On the Projector
1. Remove th
e projector cap. 1
2.
Securely connect the power cord and signal cable. Power on
the switch
2
and the Power LED flashes Red.
3. Turn on the lamp by pressing “
” button either on the rear
of the projector or on the remote. The POWER LED will now
turn Blue. 3
The startup screen will display in approximately 10 seconds.
The first time you use the projector, you will be asked to
select the preferred language and power saving mode.
4. Turn on and connect the source that you want to display
on the screen (computer, notebook, video player, etc). The
projector will detect the source automatically. If not, push
menu button and go to “OPTION”.
Make sure that the “Source Lock” has been set to “Off”.
If you connect multiple sources at the same time, press the
“SOURCE” button on the control panel or direct source keys
on the remote control to switch between inputs.
When Power
mode (Standby)
is set to Eco, the
VGA and RJ45
will be deacti
-
vated when the
projector is in
standby.
1
2
Or
3
