E
nglish
11
Installation
Power/Standby
Powering On the Projector
1.
Remove the lens cap.
2.
Ensure that the power cord and signal cable are securely
connected. The Power LED will flash
green
.
3.
Turn on the lamp by pressing “Power/Standby” button on
the control panel.
n
And the
Power LED
will turn
green
.
The first time you use the projector, you can select your
prefered language from quick menu after the startup
screen display.
4.
Turn on your source (computer, notebook, video player,
etc.). The projector will detect your source automatically.
If the screen displays “No Signal”, please make sure the signal
cables are securely connected.
If you connect multiple sources at the same time, use the
“Source” button on the control panel to switch.
Powering On/Off the Projector
Turn on the
projector first
followed by the
signal sources.
