Service Manual
6-9
B Disassembly cleaning method
F
PRECAUTION:
NEVER REMOVE THE MIRROR. THE POSITION OF THE
MIRROR
IS PRECISELY SET AT THE FACTORY.
PERFORM ALL CLEANING OF THE MIRROR WITH IT
ATTACHED TO THE UNIT.
After performing disassembly cleaning, adjustment of the unit will be necessary.
Disassembly cleaning should only be performed when there is considerable contamination
which cannot be removed by air spray.
q
Disassembly and clean the LCD panel units
Disassembly and assembly of the LCD panel units is performed according to the
exploded view diagrams given for each panel, cleaning of the mirror is always performed
with it attached to the main unit. Perform the cleaning of each part according to the cleaning
methods described below.
1. LCD panels Assy (LCD panel and polarizing glass lens)
Remove dust, etc. by wiping with a soft cloth. For heavy contamination, remove by
moistening the cloth with alcohol.
F
CAUTION: NEVER USE ORGANIC SOLVENTS (TINNERS, ETC.) AS THEIR
USE WILL CAUSE DAMAGE TO THESE SURFACES. NEVER USE
WATER OR OTHER LIQUIDS ON THE LCD PANELS ASSY. IF THE
LIQUID GETS INTO THE CIRCUITS, DAMAGE WILL RESULT.
2. Mirrors
Remove dust, etc. by wiping with a soft cloth. For heavy contamination, remove by
moistening the cloth with alcohol.
F
CAUTION: NEVER USE ORGANIC SOLVENTS (TINNER, ETC)
AS THEIR
USE, WILL CAUSE DAMAGE TO THESE SURFACES.
