Service Manual
1-3
1.2 The appropriate operation for using projector
q
Do not place anything which would block either the panel or overhead the projector’s
cooling slots.
q
The housing may be cleaned with a soft cloth moistened with a diluted solution of mild
cleaning solution.
q
The product’s LCD panel and lens are extremely sensitive; do not use abrasive cleaners,
waxes or solvents.
q
Press “RESET” if anything appears wrong.
q
If the display is unstable or flickering, adjust by using “TRACK” and “CON/BRI”
function.
q
The Remote Control unit uses two AA alkaline batteries.
q
No image appears on the screen, check the following:
§
Press the “POWER/STANDBY” button and ensure all cables and power connections are correctly and
securely connected.
§
Ensure the pins of connectors are not crooked or broken.
§
Check if the projection lamp has securely installed.
§
Ensure the cooling fan is on. If not, you may need to change the fuse.
1.3 Technical specification
q
LCD panel
Active Matrix TFT color LCD
1.3” Poly-silicon panel * 3
tr=14ms, tf=34ms response time
250:1 contrast ratio (typical)
18 % high optical transmittance
q
Brightness
450 ANSI Lumens
