Optoma DLP D2+, User Manual

Page: 32 / 51

English 32
USING THE PROJECTOR
Zoom menu
Use to reduce or magnify an image on the projection screen.
Note: Zoom settings are retained on power cycle of the projector.
Image Shift menu
Adjust the projected image position horizontally (H) or vertically (V).
Note:
The image size will reduce slightly when adjusting the horizontal and vertical keystone.
Geometric Correction menu
‡
Four Corner:
This setting allows the projected image to be adjusted from each corner to make a
square image when the projection surface is not level.
Note:
While adjusting the Four Corner, the Zoom, Aspect Ratio, Image Shift, and 3x3 Warp menus
are disabled. To enable Zoom, Aspect Ratio, and Image Shift, reset the Four Corner settings to
the factory defaults.
‡ H Keystone: Adjust image distortion horizontally and make a squarer image. Horizontal keystone is
used to correct a keystoned image shape in which the left and right borders of the image are unequal
in length. This is intended for use with horizontally on-axis applications.
‡ V Keystone: Adjust image distortion vertically and make a squarer image. Vertical keystone is used to
correct a keystoned image shape in which the top and bottom are slanted to one of the sides. This is
intended when for use with vertically on-axis applications.
‡ 3x3 Warp: Adjust the image distortion by 9 points correction.
‡ Reset: Return the factory default settings for geometric connection.
Note:
When using Enhanced Game Mode, 4 Corner, Horizontal Keystone, Vertical Keystone, and 3x3 warping
will be disabled as the settings impact input lag. If you plan to use Enhanced Game Mode for low input lag,
we strongly recommend setting up the projector without the use for 4 Corner, Horizontal Keystone, Vertical
Keystone, and 3x3 warping.